Product Comparison
Click to add product
Mode
2.5D mode
Sensor head input
Up to 2 sets (SR7001 supports SR7000 series sensors SR7002 supports SR5000 and SR8000 series sensors. SR9001 supports SR9000 series sensors and only one sensor can be connected.) ♦ When two sensors are used the sensor heads must be of the same model
Sampling period (trigger interval)
Max.1kHz（1ms）
Ethernet interface
· Numerical output · Connect the attached computer application software developed by SinceVision. In addition to the above functions you can also upload or download detection settings and send and receive various data including contours/images.· 1000BASE-T/100BASE-TX
Digital Input(Level control/enable input/ Measurement start input/Measurement stop input/Trigger input)
Adaptable to NPN and PNP outputs.
Digital Output(Batch status output)
NPN type open collector output
Min. Display Unit(μm)
0.1
Encoder input
1 set: compatible with RS-422 linear driver output (with 5V output: 150mA Max.) or open collector output (supporting 5V/12V/24V).
Encoder input Response frequency(RS-422 linear drive)
2-phase /1 increments by 1.6MHz; 2-phase /2 increments by 3.2MHz;2-phase /4 increments by 6.4MHz
Encoder input Response frequency(Open collector )
2-phase /1 increments 100kHz; 2-phase /2 increments 200kHz;2-phase /4 increments by 400kHz
Heat dissipation
Natural heat dissipation
Display language
Support Chinese (Simplified)/English switching
Rated power supply voltage
24VDC±10%
Rated maximum current consumption (A)
6 A
Ambient temperature (mounting at bottom) (℃)
0~50 ℃
Ambient humidity
35%~85%RH(no condensation)
Dimensions(mm) (mm)
182x169x64 mm
Weight(g) (g)
About 1900 g
Compare
Clear the comparison bar
